In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools Serial Port menu, the COM number for your device may vary depending on your system. Older Windows Driver Version and Instructions. Download the Windows CH340 Driver; Unzip the folder. If you are running a 64Bit Windows: – run the SETUP64.EXE installer. Installs the Intel® Serial IO host controller driver version 1.3 for Intel® NUCs. The Intel Serial IO driver is required if you plan to use the I2C, UART, or GPIO host controllers. Not sure if this is the right driver for your Intel NUC? Run Intel® Driver & Support Assistant to automatically detect driver updates. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel) 2. Right click on the hardware device you wish to update and choose Update Driver Software 3. Choose to select the location of the new driver manually and browse to the folder where you downloaded the driver. About Sound Card Driver. Installs the DCH-compliant Thunderbolt™ bus driver for the Intel® NUC products with Thunderbolt using Windows® 10. This driver is required if you plan to connect Thunderbolt devices. Synaptics TouchPad Driver 19.2.17.59 for Windows 10 The Synaptics Gesture Suite device driver is now equipped with Scrybe Gesture Workflow Technology – the next generation in TouchPad-based PC.

Dec 21, 2020 • Filed to: USB Recovery • Proven solutions

Have you ever had difficulty connecting your devices to your computer using a Prolific USB to Serial adapter? If yes you are lucky to find this page, it will give you all the information need to fix an unresponsive Serial driver adapter. You may have noticed a yellow exclamation mark hovering over or beside the USB to Serial Driver when searching your Device Manager and if you have we can all agree that it signifies a prevailing problem.

Overview of the Error

If you are not able to connect your device to your PC using a USB to Serial adapter it may be that

• The USB driver is outdated
• The USB Driver is missing
• Or even a corrupted driver

While you can't be so sure what the exact problem is there are solutions you can adopt to fix the issue once and for all. Read on to find quick fixes to resolve the problem.

1# Fix Prolific USB to Serial Driver not Working

Solution: Roll your Prolific USB to Serial Driver back to an older version

Updating your drivers often work wonders for your system because it makes sure that it runs on the latest features that guarantee maximum functionality. Unfortunately updating your drivers can cause this kind of error especially if your latest update does not work too well with your hardware. Once you upgrade your PC to the latest Windows version your Prolific USB to Serial Driver also updates to the latest driver software and if the driver is not compatible with your Hardware issues may arise. To correct the error, you will have to download the driver again by following these steps.

• Right-click on your PC Start button and open Device Manager

• Double click LPT and COM ports then locate the Prolific USB to Serial Driver and right-click it so you can select Update Driver

• For driver software click My computer

• From My computer select 'Let me pick from a list of drivers available'

• Choose an older version from the list then click Next

• The driver you selected will be installed automatically
• Once it has been downloaded reconnect the driver to see if it works.

2# Fix Prolific USB to Serial Driver 'Coder 10'

Download pentax usb devices driver. Driver issues reveal themselves in so many ways or through messages such as

• This device will not start (Code 10)
• There is no driver installed in this device
• The driver was not successfully installed

A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.

Window 64 bit Fix

To fix Windows 64 bit OS including Prolific USB to Serial Adapter, follow through these steps.

• Download 'PL2303_64bit_Installer.exe and Save
• Remove every USB to Serial adapter from your PC and double click the 'PL2303_64bit_installer.exe
• Follow the prompt by plugging in one USB to Serial adapter the click on Continue
• Reboot your PC to get Windows up and running

If you have followed these process through and you still see the same error go to your device manager

• Open the control panel and navigate to Device Manager
• From your control panel navigate to the System category and click the Hardware tab
• Scroll to the LPT/COM port and double click Prolific USB to Serial Comm Port
• Click Drivers in the Properties section
• The Driver you choose should read '3.3.2.102 with an appropriate date attached
• If the date is wrong then it means the wrong driver was installed
• Unplug the Serial adapter and run the steps again to install the correct driver

Window 32-bit

For Windows 32-bit OS systems follow these steps

• You will have to download the 'PL-2303_Driver_Installer.exe and save from Microsoft download link
• Run the program and eradicate the driver if you can
• Run the installer once more to install a correct driver

To Troubleshoot for error if your device still does not work

• Go to Control panel, enter System to access your Device Manager
• Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port
• Click Driver in the Windows Properties section
• The driver must be numbered as '2.0.2.8' and dates accordingly

If the driver was not installed, remove the Serial adapter then run 'PL2303_Driver_Installer.exe' again. Follow directions in Device Manager to download the correct driver

The three solutions listed in this article have proven to be quite helpful in fixing a Prolific USB to Serial driver not working on Windows 10. They may appear confusing at first but if you follow each step in detail you can resolve the issue.

Video Tutorial on How to Fix USB Device Not Recognized

USB Solution

Recover USB Drive

Format USB Drive

Fix/Repair USB Drive

Know USB Drive

If the hardware device has a USB interface connection and is connected to a USB computer port, the computer needs to have a device driver installed (unless it is a USB HID device; see below). The device driver tells the computer how to properly handle data communications between the computer and the hardware USB device.

USB HID Devices

The USB Human Interface Device (HID) class is a specification for computer peripherals such as keyboards, mice, and game controllers. A computer doesn’t require a separate device driver for USB HID devices because they are recognized and handled directly by the Windows operating system. Other devices that comply with the USB HID spec are also recognized automatically by a computer and don’t require a separate device driver.

USB HID devices that are supported by Calman include the SpectraCal C6 Colorimeter and the X-Rite i1Display light meters. When one of these meters is plugged into a computer, Windows automatically connects to the meter without requiring an external device driver.

Novus Port Devices Driver Download For Windows 10 64-bit

Network Control Devices

If the hardware device is connected to a computer via a wired or wireless IP network connection, the computer does not require a device driver for that device.

Serial Control Devices

If the hardware device has an RS-232 serial connection and is directly connected to a computer serial port, the computer does not require a device driver for that device.

However, since most computers no longer provide a serial port, a serial hardware device will usually be connected to a computer via a USB to serial converter. In that case, the computer needs to have a device driver installed to properly communicate through the USB to serial converter.

USB to Serial Converters

If a hardware device has an RS-232 serial connection, a USB to serial converter is usually used to connect the serial device to a computer’s USB port.

The computer sends data to and receives data from the USB port on the converter. The converter translates that data, through its serial port, to a serial hardware device. The computer requires a device driver to tell it how to properly handle data communications with the USB port on the USB to serial converter.

A data buffer is included within some USB to serial converters. The data buffer improves the reliability of a device interface at high data rates. Many USB to serial converters without a data buffer do not provide a reliable interface between Calman and hardware devices. The USB to serial converters produced by FTDI include a data buffer. The FTDI converters have been tested with all hardware devices supported by Calman and have been certified to provide a reliable interface in all cases.

For more information, see the Calman setup guide for the FTDI USB to serial converters.

Obtaining Device Drivers

Novus Port Devices Driver Download For Windows 10 7

Device drivers can be obtained in a number of ways.

The required device driver can often be obtained from the hardware device manufacturer. Device manufacturers may package a device driver with the device or they may provide a device driver download on their device support page.

In cases where the manufacturer supplies operating software with the hardware device, the device driver may be installed as part of the manufacturer’s operating software installation.

If you will only ever connect one or two USB devices to a Calman computer, you may wish to obtain the device driver for your device(s) directly from the device manufacturer.

For convenience, SpectraCal provides a Device Driver Pack that includes device drivers for most of the hardware devices supported by Calman.

To ensure that you have the proper driver, or if you will be connecting a number of different USB devices to Calman, you may wish to download the Calman Device Driver Pack from the Calman Download page to install all supported device drivers on the Calman computer.

Installing Device Drivers

Installing the SpectraCal Device Driver Pack on a Calman computer automatically installs and registers the included device drivers for Calman supported hardware. Installing a driver that you obtain directly from a device manufacturer also automatically registers the device driver in Windows.

When a hardware device is then connected to the Calman for the first time, the proper device driver is automatically associated with the device.

Unsigned Device Drivers

Many currently available device drivers have not been tested and certified by Microsoft. These drivers are referred to as unsigned device drivers. Some of the drivers provided in the SpectraCal Device Driver Pack are unsigned.

Windows 7 or Earlier

If you are installing an unsigned device driver in Windows 7 or earlier, a Windows Security dialog will open to give us a choice of whether or not to install an unsigned device driver. If you feel comfortable with the source of your device driver file, you will probably want to select the Install Anyway option.

Windows 8.0 or Later

If you are installing an unsigned device driver in Windows 8.0 or later, you will need to follow one of the special driver installation procedures below.

• Windows 8.0

1. Open Settings (move your mouse to the top or bottom right corner of the screen and wait for the charm bar to appear, then click the Gear icon)
2. Click Change PC Settings
3. Click General
4. Scroll down and click Restart Now under Advanced Startup
5. Click Troubleshoot
6. Click Advanced Options
7. Click Windows Startup Settings
8. Click Restart
9. When the computer restarts, select Disable Driver Signature Enforcement from the list.
10. You can now load the unsigned driver(s). After restarting the computer, any drivers that you installed will continue to function.

Note: This may need to be repeated each time you update your graphics driver.

• Windows 8.1 and Windows 10

1. While holding down the Shift key, go to SettingsPowerRestart
2. On shutdown, you will be presented a list of Options. Select Troubleshoot
3. On the Troubleshoot menu, select Advanced Options
4. On Advanced Options, select Startup Settings
5. Click Restart - Machine will reboot.
6. This will bring you to Startup Settings. Select 7 - Disable driver signature enforcement

When Windows starts, Driver Signature Enforcement is disabled.

You can now load the unsigned driver(s). Packard bell monitors driver download windows 10.

After a normal reboot, Driver Signature Enforcement will re-enable. Any drivers that were installed while it was disabled will continue to function.

Windows Device Manager

When a USB-controlled hardware device is connected to a computer, Windows first needs to recognize the device and properly connect to it. The proper device driver needs to be registered with Windows to support that device connection. Only if Windows is properly connected to a device, will Calman also then be able to connect to the device.

Novus Port Devices Driver Download For Windows 10 32-bit

Windows Device Manager is the important software utility for managing Windows connections to the external hardware devices that we are then going to want to connect to Calman. Device Manager allows us to check a device connected to Windows and manage the device’s driver registration.

Note: When Calman is unable to connect to a USB-controlled hardware device (or a USB to serial converter), Device Manager is one of the first places to check.

Any device that is connected to a computer’s USB port will create a device listing in Device Manager. The device will either be listed under an existing device type (e.g. “Ports (COM & LPT)”, or a new Device Type will appear (e.g. “X-Rite Devices”)

Under its particular Device Type, the device will be given a Device Description (e.g. “USB Serial Port (COM6),” “ColorMunki Smile”).

Novus Port Devices Driver Download For Windows 10

Alternately connecting and disconnecting the USB plug for the device in question may help to identify which device listing in Device Manager corresponds to the hardware device in question.

Virtual COM Port Drivers

Some USB devices use a Virtual COM port (VCP) driver, which causes the USB device to appear as an additional COM port available to the PC (listed in Windows Device Manager, under the Ports (COM & LPT) type, as a “USB Serial Port (COMx)” device.

Novus Port Devices Driver Download For Windows 10 Pro

Calman software can then access the USB device as it would a standard COM port. Note the designated COM port number in Device Manager (COMx), as you will need to select that port number on the Calman device connect dialog.

Normal Device Manager Listings

Following are many of the popular hardware devices that are supported by Calman that require a Windows device driver to support their USB connection. Following each device name is the Device Type and Device Description, as they will be listed in Device Manager when the proper device driver is installed.

If your device is listed some other way in Device Manager, the device driver is not installed properly.

• AV Foundry VideoForge Classic
  
  • Network Adapters > RNDIS Gadget
• EIZO Monitors
  
  • Human Interface Devices >
• Fujifilm IS-mini
  
  • Universal Serial Bus Controllers > IS-mini
• FTDI USB to Serial Converter
  
  • Universal Serial Bus Controllers > USB Serial Converter
• HDfury Integral 4K60
  
  • Universal Serial Bus Controllers > USBXpress Device
• HP Z27x
  
  • Libusb-win32 devices > HP Z27x USB
• Klein K10
  
  • Universal Serial Bus Controllers > USB Serial Converter
    (meter has internal FTDI converter)
• Lumagen Radiance Pro
  
  • Ports (COM & LPT) > USB Serial Port (COMx)
• Murideo SIX-G
  
  • Ports (COM & LPT) > USB Serial Port (COMx)
• Quantum Data 780-series generators
  
  • Ports (COM & LPT) > USB Serial Port (COMx)
• SpectraCal C3 Colorimeter
  
  • X-Rite Devices > ColorMunki Smile
• SpectraCal C6 Colorimeter
  
  • Human Interface Devices > USB Input Device
• SpectraCal ColorBox/eeColor
  
  • Universal Serial Bus Controllers > USB Serial Converter A, USB Serial Converter B
    (unit has internal FTDI converters)
• SpectraCal VideoForge PRO
  
  • Ports (COM & LPT) > USB Serial Port (COMx)
• UPRtek MK550T Spectroradiometer
  
  • Human Interface Devices > USB Input Device
• X-Rite i1Pro 2
  
  • X-Rite Devices > i1 Pro
• X-Rite i1Display
  
  • Human Interface Devices > USB Input Device

Updating a Device Driver

If a hardware device was connected to the computer before its correct device driver was installed, Windows may have registered an incorrect device driver to the device. In that case, you may need to uninstall the incorrect driver (in Windows Device Manager), then reconnect the device to the correct device driver.

Follow these steps to update a device driver:

1. Identify the device listing in Windows Device Manager that corresponds to the hardware device of interest. Alternately connect and disconnect the device USB connection as you are watching the Device Manager screen to identify the listing.
2. Right-click on the device description and select Update driver from the pop-up menu.
3. When asked how you want to search for drivers, select Browse my computer for driver software
4. On the following screen, click the Browse button.
5. Navigate to the drive folder containing the correct driver for the hardware device. For the Device Driver Pack, that is:
   C:Program Files (x86)SpectraCalDrivers (corresponding device folder)
6. Click the OK/Next button to update the driver.