1. Scm Motherboards Drivers
2. SCM Motherboards Drivers
3. Scm Driver

This article will provide details on the Supermicro X9SCM-F Motherboard.

• 1Motherboard Data
• 2BIOS
• 3IPMI

Motherboard Support. Downloads Receive the latest software, drivers, manual, utilities. Warranty Check the warranty policy. RMA Status Track a repair status. Best Motherboards for AMD Ryzen 3 3100 Windows Central 2021. AMD's Ryzen 3100 is a budget-friendly processor, but it's still capable of some serious computing power. To make the most of this Ryzen. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer. GE63 Raider RGB SCM Utility MSI GE63 Raider RGB System Control Manager Utility MSI GE63 Raider RGB SCM Utility GE63 Raider RGB 8RE SCM System Control Manager MSI. CyberPowerPC Driver Download. Encode Explorer.

Motherboard Data

• Manufacturer: Supermicro
• Motherboard: X9SCM-F
• Manual: manual X9SCM-F
• FAQs: FAQs for 'X9SCM' bei Supermicro, FAQs for this Motherbard at Thomas Krenn
• Downloads: Supermicro motherboard X9SCM-F
• Supermicro Motherboard Drivers & Tools CD: CD/DVD Image (Please note, that the files (drivers, tools, ...) on this CD might be out-of-date.)

Features

• Motherboard form factor: Micro ATX 9.6' x 9.6' (24.4cm x 24.4 cm)
• CPU socket: Socket H2 (LGA 1155)
• RAM:
  • Number of DIMM slots: 4
  • Memory type: 1333/1066/800MHz ECC DDR3 SDRAM, 72-bit, 240-pin DIMMs
  • Possible sizes of Memory Modules: 1GB, 2GB, 4GB, 8GB
  • Maximum Memory Capacity: 32 GiB (ECC Unbuffered memory (UDIMM))
• SATA chip: Intel® C204 PCH
  • Intel or LSI Raid stack can be used
  • 4x SATA2 (3Gbps) supports RAID 0, 1, 5, 10
  • 2x SATA3 (6Gbps) supports RAID 0, 1
• LAN-Chip: 1x Intel 82574L (LAN 1), 1x Intel 82579 PHY (LAN 2)
• Expansion slots:
  • 2x PCI-E 3.0 (x8) in x8 slot (with E3-1200V2 Ivy Bridge CPUs with BIOS 2.0 or newer)
    • with E3-1200 Sandy Bridge CPUs these two slots function as PCI-E 2.0 (x8)
  • 2x PCI-E 2.0 (x4) in x8 slot
• Internal I/O ports:
  • 2x SATA 3.0 Ports
  • 4x SATA 2.0 Ports
• External I/O ports:
  • IPMI 2.0
  • 2x USB Ports Rear (USB 0/1), 6x USB Headers (USB 2/3, USB 4/5, USB 12/13), 1x Type A (USB 11)
  • PS/2 Keyboard/Mouse
  • 2x Fast UART 16550 Connections: 1x 9-pin RS-232 Port (Backplane COM1 Port), 1x Header (FP COM2)
• Graphics chip: Matrox G200eW

• IPMI chip: Nuvoton WPCM450R IPMI Chip with ATEN-Software

Hardware Revisions

• Version 1.11A
• Version 1.11
  • This mainbard revision is not compatible with 3Ware 9690 RAID controllers. Such a system runs slowly, and the controller is reporting 'Drive Timeouts'.

Scm Motherboards Drivers

BIOS

BIOS Demo (clickBIOS)

Demo of this BIOS: clickBIOS X9SCM-F

BIOS Versions

Recommendation: After a BIOS update load the default settings of the BIOS, and adjust the configuration as suggested below at BIOS Configuration.

• Version 2.0b (BIOS Date 09/17/2012)
  • Signed off for general usage by our QA department on: 03.12.2012.
• Version 2.0a (BIOS Date 06/08/2012)
  • Signed off for general usage by our QA department on: 22.06.2012
  • Support of the new E3-1200v2 (Ivy Bridge) CPUs.
  • To update the BIOS, follow the steps described in Updating the BIOS of a Supermicro X9SCM-F Motherboard.
• Version 2.0 (BIOS Date 05/08/2012)
  • This version is not signed off for usage with our servers.
  • We found the following technical issues with this BIOS version:
    • Adaptec RAID Controllers get only detected in PCIe slot 4.
    • ME failure messages during BIOS update.
    • When the PXE boot option is enabled for both NICs, the server will not boot. Error message: 'PCE-E05: The LAN adapter´s NVM configuration is corrupted or has not been initialized. The Boot Agent cannot continue'. (Supermicro FAQ 14343)
  • 'MEI: Init hw failure' with Ubuntu Version 12.04 fixed.
  • BIOS User password function corrected. (Supermicro FAQ 14328)

IMPORTANT: Motherboards with a BIOS version of 2.X must not be flashed with a 1.X BIOS version. After such a downgrade, the motherboard will not boot up again.

• Version 1.1a (BIOS Date 09/28/2011)
  • Signed off for general usage by our QA department on: 28.10.2011
  • With BIOS version 1.1 there are some issues regarding display of the correct system temperature (Supermicro FAQ 14236). FANs might not be controlled correctly (Supermicro FAQ 12759). BIOS 1.1a corrects these issue.
  • Beginning with this version, LSI HBAs (LSI 9211, 9200, 3081) can be used.
  • Issue Power Button Function = 4 Seconds Override with Restore on AC Power Loss = Last State solved (Supermicro FAQ 12810)
• Version 1.1
  • Signed off for general usage by our QA department on: 10.10.2011
  • Beginning with this version, IPMI IP addresses do not need to be entered with 12 digits any more.
  • With this version there are some issues regarding display of the correct system temperature (Supermicro FAQ 14236). FANs might not be controlled correctly (Supermicro FAQ 12759). BIOS 1.1a corrects these issue.
• Version 1.0c (BIOS Date 06/30/2011)
  • Signed off for general usage by our QA department on: 13.07.11.
  • The IPMI gateway IP can now be configured within the BIOS.
  • To configure the IPMI successfully, all 12 digits of the IP must be entered. (eg. IP: 010.010.010.160, netmask: 255.255.255.000).
• Version 1.0b
  • Signed off for general usage by our QA department on: 01.07.11.
  • The IPMI gateway IP cannot be configured within the BIOS. This must be done via other tools like IPMICFG or SMCIPMItool.
  • With this BIOS version it's possible to enter the BIOS after the first POST by pressing the 'Del' button of the keyboard.
  • To configure the IPMI successfully, all 12 digits of the IP must be entered. (eg. IP: 010.010.010.160, netmask: 255.255.255.000).
• Version 1.0a
  • With this version there can be issues with the paritioning of hard drives during the installation of Windows 2008 or SBS 2011 on a onboard Intel/LSI controller. Use a newer BIOS to fix this issue.
  • With this BIOS version, the BIOS can be entered only after the second POST (after the initialization of all components) by pressing the 'Del' button of the keyboard.
  • To configure the IPMI successfully, all 12 digits of the IP must be entered. (eg. IP: 010.010.010.160, netmask: 255.255.255.000).

BIOS Settings

At Thomas Krenn, after loading the default settings the following BIOS configuration adjustments are applied before a server with this motherboard gets its test installation and gets shipped:

Depending on the server configuration, the SATA raid settings can be optionally configured:

IPMI

IPMI Sensors

Output of all sensors using ipmi-sensors --output-sensor-state --interpret-oem-data (FreeIPMI version 1.1.1):

Note: dependent on the type of server, the list of sensors can be shorter as sensors for not available fans might be removed.

IPMI Versions

• Version 3.15
  • Signed off for general usage by our QA department on: 29.11.2013.
  • When updating this firmware the hook should remove the preserved configuration - (Unckecking this option will restore the factory default setting of BMC), only to ensure that that all updates are applied and the sensors are properly displayed. The removal of the hook sets the IPMI modules back to factory defaults and the IP address and all settings must be reconfigured by ipmicfg means or another way, see IPMI Configuration for Supermicro Systems
  • NOTE: This IPMI version resolves security vulnerability issues. For more information, please see our Wiki article Supermicro IPMI Sicherheitsupdates November 2013.

NOTE: A 3.xx firmware version may not be reflashed to an underlying (2.xx / 1.xx) version. This can damage the IPMI modules.

• Version 2.24 ( IPMI Firmware 2.24 Release Notes)
  • Signed off for general usage by our QA department on: 19.04.2013.
  • When updating this firmware the hook should remove the preserved configuration - (Unckecking this option will restore the factory default setting of BMC), only to ensure that that all updates are applied and the sensors are properly displayed. The removal of the hook sets the IPMI modules back to factory defaults and the IP address and all settings must be reconfigured by ipmicfg means or another way, see IPMI Configuration for Supermicro Systems
• Version 1.86
  • Signed off for general usage by our QA department on: 11.04.2013.
  • When updating this firmware the hook should remove the preserved configuration - (Unckecking this option will restore the factory default setting of BMC), only to ensure that that all updates are applied and the sensors are properly displayed. The removal of the hook sets the IPMI modules back to factory defaults and the IP address and all settings must be reconfigured by ipmicfg means or another way, see IPMI Configuration for Supermicro Systems
• Version 1.67 (IPMI Firmware 1.67 Release Notes)
  • Signed off for general usage by our QA department on: 22.06.2012.
  • Additional IPMI sensor Peripheral Temp
  • When you update to this firmware, uncheck the check box Preserve Configuration - (Unckecking this option will restore the factory default setting of BMC) as otherwise wrong sensor values may be displayed in the web interface and the new IPMI sensor Peripheral Temp won't be shown. The IPMI configuration will be set back to factory defaults. The IPMI IP and all other configuration options must be entered again.
• Version 1.45 (IPMI Firmware 1.45 Release Notes)
  • Signed off for general usage by our QA department: 15.03.2011.
  • IMPORTANT: Fixes IPMI security issues, see Security Problem #3 of Security Recommendations for Remote Maintenance Features for IPMI Chips with ATEN-Software
• Version 1.30 (IPMI Firmware 1.30 Release Notes)
  • Signed off for general usage by our QA department: 27.10.2011.
  • IMPORTANT: Fixes IPMI security issues, see Security Problem #1 and #2 of Security Recommendations for Remote Maintenance Features for IPMI Chips with ATEN-Software
  • Corrects the Supermicro Manufacturer ID (is now 10876, was 47488 before, which is wrong). To query OEM sensors with FreeIPMI, you need FreeIPMI version 1.0.9 or higher.
• Version 1.08 (IPMI Firmware 1.08 Release Notes)
  • Signed off for general usage by our QA department: 29.06.2011.

Software Tools

SCM Motherboards Drivers

• Intel ESB2 SATA Matrix Storage Manager enables management of the Intel onboard SATA Raid controller on Windows.
• Supero Doctor: The motherboard can be monitored with this software. The available sensors are displayed graphically.
• IPMI View: Tool for central management of IPMI functions. This software makes it possible to manage multiple in a single tool via IPMI server.

Servers with Supermicro X9SCM-F

• 1U Intel Single-CPU CSE512 Server (Version 3.0)
• 1U Intel Single-CPU SC813MR Server (Version 3.0)
• 1U Intel Single-CPU SC813M Server (Version 3.0)
• 2U Intel Single-CPU SC825 Server (Version 3.0)
• 2U Intel Single-CPU SC825M Server (Version 3.0)
• 3U Intel Single-CPU SC835 Server (Version 3.0)
• Server-Tower Intel Single-CPU SC731 Silent (Version 3.0)
• Server-Tower Intel Single-CPU SR105 Silent (Version 3.0)
• Server-Tower Intel Single-CPU SR108 Silent (Version 3.0)
• This motherboard cannot be used in a CSE513 (SC513F-350B) chassis, as there would not be enough cooling. The air flow would be next to the CPU, so the CPU would overheat.

Wiki articles for this Motherboard

FAQs for this Motherboard

Scm Driver

• x64-bit system control manager driver
• x64-bit msi system control manager driver
• x64-bit msi cx600 system control manager driver
• x64-bit msi system control manager cr 460 driver
• x64-bit msi gt683dx system control manager driver
• x64-bit msi system control manager utility driver
• x64-bit msi wt72 system control manager utility driver
• x64-bit wt72 system control manager utility driver
• x64-bit wt72 vpro system control manager utility driver
• x64-bit msi ws60 system control manager utility driver
• x64-bit ws60 system control manager utility driver
• x64-bit ws60 6qj system control manager utility driver
• x64-bit ws72 6qh system control manager utility driver
• x64-bit msi ws72 system control manager utility driver
• x64-bit ws72 system control manager utility driver
• x64-bit ws63vr system control manager utility driver
• x64-bit msi we62 system control manager utility driver
• x64-bit we62 system control manager utility driver
• x64-bit msi we72 system control manager utility driver
• x64-bit we62 7rjx system control manager utility driver